Bandai 1/72 A-Wing #8

Back to the canopy work

Bandai provided two type of canopy, both are in close position. One is without the frame so no need to mask, the other one is typical - I pick the typical one as the frame for the other type seems too thick ...

But, somehow Bandai did not provide a user-friendly canopy this time, there are 4 gates connecting to it (while there are 3 on the frameless one) and there are two gates which will be visible after installation. 

The gate is so big and visible, and turns a bit white too - I started from #400 sand paper and end with #10,000. The result is :

Next is polishing with compounds and soak in floor clearer.