Xray 1/8 RX8 23'

I ran the RX8 2016 for years, and it is time to refresh with a newer generation, RX8 23'

CRC 1/12 XTi

Found it out from storage, been with me for quite some years without attention ...

I have the Ego conversion kit too. This chassis does not look outdated even after years

Xray X4 2025'

The 3rd X4 I got so far, and I have built none yet ...

This round it also comes with 3D printed bumper

Xray 1/12 X12 2025'

A change of design, it looks like a Schumacher in Xray box and material

It comes with 3D printed bumper, metal bottom chassis plate and whole bunch of graphite parts

 

KittyHawk 1/48 F-35A #4

Mounting the right wing

There is a large gap between the upper fuselage and the wing.

I have to do a bit of sanding and adjustment to fit it, yet there is a gap at the front edge which requires filler.

Just test fit the left wing, it is going to be the same exercise waiting for me.

Italeri 1/12 Lancia Delta HF

Nice looking Delta HF !

Optima re release outing

Been a long while since the last run, and the secret place I ran this kit last time was no longer exist. Replaced the damaged 35T pinion and found a quiet road from business park and ran 2 packs with this lovely on-road buggy.

Xmas is coming

Xray RX8 23' and X4 25'

KittyHawk 1/48 F-35A #3

Applied Mr Color C306 on the edge of air intake, and MX02 on inner engine wall.

Installed air intake and engine, combined the fuselage.

KittyHawk 1/48 F-35A #2

Added a bit of details with Tamiya enamel paints and wash with Mr Weathering (grey) on the gear wells,  weapons compartment and cockpit.

Installed these components inside the top and bottom fuselage. Fitting is good.