Mi5 arrived

Serpent 977 is almost there ...

Serpent 977 with Futaba 172HV servo for steering, 9352HV for throttle and IDM Sirio base engine.

Mugen MRX5 World Champ

New toys ;)

Yokomo BD7

Yokomo BD7 is ready. Equipped with LRP Flow and x20 10.5 motor, gear at 32/116T and Flow v5 firmware at 1,2,2,2,7,3,0. Good pick up acceleration and top speed !

New Charging Station at home

Can charge two packs at one go, means shorter preparation time to go 1/8 EP ;)

Serpent 966TE

The Serpent 966TE and the SH engine are donated by a friend so I can start the 1/8 GP earlier and smoother. It is now equipped Futaba BLS 351 and 352 servo, and the newly design clutch from 977.
Ready to test this weekend !

DMX410

Just received DMX410 conversion kit for Durango DEX410.

More clear layout with shorty 2s Lipo.

Xray T4

T4 - ready to test, Ride B4 bodyshell, HobbyWing 3.1 with Tekin Gen2 13.5T (RPM type).

VBC WildFire

First test run was not very good, ended at the first pack due to damage of front and rear right suspension parts. The crash was due to a sudden oversteer during acceleration exiting corner. It might due to the fact that rear diff movement was not smooth after fitting in the ball bearings. I was hoping that it will become smoother after run in - I was wrong. Replaced the damaged parts and file the gear diff housing where the ball bearings fit in to allow more clearance. It is now silky smooth and ready for test again in next session.
The car is basically stock car kit, except that I added the alloy front spool hosting and the motor cooling fan mount. It is equipped with ORCA VX ESC and TX 13.5T motor.