966e with 962c bodyshell

x10 Link with 88cv bodyshell

Ready to go !

Xray x10 Link

Finalizing initial setup of x10 link. In order to achieve front 5 mm and rear 6mm ride height, you can see the amount of extra collars I have inserted in front (red color), mid (red color) and rear motor mount (silver + blue). I am using the -2.5mm insert for the rear axle already. If you happen to have a better way to reduce the rear ride height effectively, other than trim down the rear tires diameter or increase the CG, please share with me !

Setup of x12

Here is the setup after 4 sessions of testing :

ESC - HobbyWing v2.1 120a 1S (latest mod firmware v3 110930)

DDRS 6

boost 12

turbo to the max

Motor - LRP x12 6.5 octa wind

Speedmind 35F / Xceed soft rear

rollout around 42.5 mm

gear ratio : 25/88T

Ride height - F 4.2 / R 4.4mm

Shock - Yokomo 550wt

Tubes - Kyosho 30,000 oil

Rear down stop at 1mm

Other setting are following build manual