Collection of 4 optima

Ready to run in OS 2101SP on 977

Touch up the setting on chassis and charged all necessary lipo packs

Trimmed tires - Enneti F32 R35

Ready for engine run in :)

Collari front body stabilizer for 977

Replaced original short ball end to long one in front :

Smooth and easy.

OS R2101SP on 977

To be run in with 977 and original OS pipe set. OS did a great crasfmanship on the crankshaft and air outlet

MakeUP 1/43 Ferrari 126c Turbo

Rody VS racing 2102r fresh from oven

SparMax compressor compared to Tamiya compressor

This is Taimya power : about 15psi

Then the SparMax compressor : slightly more than 80psi

Obviously painting 1/43 or 1/24 scale model cars would not require 80psi.

Will see how it performs compare in the range of 20-30psi when spraying body shells.

Rebuilding Serpent 977

The front UJ pin looks very bad

Rody modified - OS 2102 Shimo edition

Service the Reds m7 WCXL engine

The engine has been working with the Mugen mrx5wc for quite some months. Time for servicing.

Opened the engine and checked for conrod condition, polished the piston and rebuilt the clutch.

Two collection of SRC models 1/43 kit

Sacks Racing Model from UK, made in the 80's.

RA273 :

And the Lotus 72 :

Tamiya 1/24 Porsche 934 Turbo RSR progress #12

Gaia semi gloss black applied on cockpit, rolling cage and other suspension parts. Gaia German gray applied on driver seat.

Racing 43 1/43 Seat Cordoba WRC Ufficiale Safari 99 progress #5

Gaia yellow

Initial coat Gaia yellow diluted with Mr Thinner 1:2.5

Wet coat Gaia yellow silted with Mr Thinner 1:3

Tamiya 1/24 Porsche 934 Turbo RSR progress #11

3 levels of polishing using Tamiya polishing material, and a layer of wax

Motor low turn motors

Shepherd F1

Optima and the Le Mans motor

Racing 43 1/43 Seat Cordoba WRC Ufficiale Safari 99 progress #4

Applied metal surface primer and white surface primer after heavy sanding on the rear wing :

Then trial fit on the main body shell

Tamiya 1/24 Porsche 934 Turbo RSR progress #10

No 2000 to no 4000 sand papers

Ready for polishing