Bodyshell for IF15

Trying Bitty Design liquid mask instead of masking tape. 4 layers of liquid mask with a brush. And sprayed with both Sparmax Flyer SR and Iwata HP-BCS using Faskolor, final coat with a few layers of Tamiya white (spray can) to protect the paints from nitro. 

Fujimi 1/24 Ferrari 355 #2

 After working hard on the painting and gloss clear, seems the outcome isn't good. It could be due to the primer isn't so smooth ...

Use GSI paint remover to start over again, 2 bottles in a zip lock bag, wait for 30 mins :

This time use GSI 1500 white primer instead of Tamiya one, diluted 1:3 with Mr Color levelling thinner, with Hansa 381 at 25psi. Surface is much smoother this time. 

Followed by 6 wet layers of GSI #158, diluted 1:3.5 to 4 with Gaia T01/T08 mixture (9:1) with Tamiya HG 3 airbrush at 25psi. 

Fantom EP-4WD body shell