Volks IMS 1/100 K.O.G. #14

Completed armour for left leg and right hand

I am sooooooo slow at this .....

FondJoy 1/12 Ironman mk1 #2

Two days - and only an hour or so spent each day and here is the completed trial build

All the parts just come together nicely, fitting well, tightness is balance on joints. 

There are some injection pin mark and gates (think I only see one under gate so far) which are obvious and require some clean up and touch up in future. And one lost part - which is to join the left shoulder armour on the upper arm. Not sure if it is lost during manufacturing, or while shipment, or it is me. 

I see what I can make with some copper wire to connect them again. 

FondJoy 1/12 Ironman mk1 #1

Not sure if it is the only one mk1 plastic model kit in the market as of today, I can only find this by my way. Pre-paint, and fitting is quite well. So far only two issues : 

1. one missing joint part on left upper arm

2. there is no undergate

KittyHawk 1/48 F-35A #6

Installed nose cone, and mask the cockpit, gear wells and weapon bays to prepare for paint shop

Yokomo BD12 build in progress #4

Installed HobbyWing 3.1 ESC with a G2 5.5T motor

It will be the very first time I run a TC with mod motor, 24/90T gear, final gear ratio 1:7.125

RG Z'Gok #3

Did some sanding on the parts in open air to avoid the dust impacting the furr kids before paint job

Install upper arms armour on inner frame, painted with Modo MX-02

Mini RC

I am not sure its scale, maybe 1/28. The kit comes with everything I need to complete the project, including motor, servo, a ESC which is smaller than the finger nail, radio and battery. 

Kit is not very solid according to my friend who arrangement the shipment and already completed and ran. 

3Racing Cero Zero ACE 2.0

Saw this kit when I was back in Hong Kong, but just that timing is not right for me to bring it back home. Glad to have dear RC shopkeeper willing to ship it across. 

 

On a footnote, I keep reading from the box saying it is v2.1. 

Or is it just me ?

Schumacher Eclipse 6

It has some nice design even other brand has "incorporate" into their n"new" design. 

I just owner, when would some RC makers suddenly recall there is still 1/10 pan car market ? 

Corally SSX 125

Lovely and simple design, going for a complete different direction than other major player.

Frankly speaking, if it works, who would car if the design is complicated or pain and simple ?

Yokomo Re Release Works 91'

I was in my 2nd year of university, I was not involved in RC during that time, and definitely missing RC market news during that era.

After 30 years from school, I can have one at least. Not too bad,