Cayote X5 dual charger

Heavy unit - feel very solid

Schumacher Vibe TC

It comes with a thick fibre glass board - for alignment of the bulkheads front and rear

RC12L re release

 

Mugen MTC2 #4 (completed)

Last project completed in 2025. Shocks and bodyshell completed. 

Mugen MTC2 #3

Chassis completed without shocks, the build is smooth and the chassis is very solid

Fitted with Goat body shell

Wiring done

Modify Hotshot re release stage 1

This is the first stage of Hotshot re release upgrade since I built it few years ago. 

Objective is to improve the steering especially its ability to return to neutral point after steering action.

Servo has been upgraded to DSPower servo - more powerful than the original servo used on the kit since I built it. In addition, the water proof compartment has also be replaced by alloy chassis to enable steering rack between the servo and the L and R steering rods.

Servo saver was removed too.

Stage 1 modification completed. Also changed radio to FlySky with FGr4D receiver. ESC and motor remained unchanged - silver can and Novak GTX7.

KittyHawk 1/48 F-35A #7

Been a while since last update on this project.

Mixed Gaia 1001 silver with C317 for the base color. Wanted to make a metallic grey.

Yokomo YZ-834B re release #3 (completed)

Completed the build and bodyshell.

Test run over weekend too. 

It is slow (blame the 27T motor) but fun !

Mugen MTC2 #2

Installed bumper and body posted, receiver, motor and cooling fan

The steering swing rack is solid. Now pending the four arms and legs.