Static model : Tamiya 1/24 Porsche 956 #24

Minor touch up today, enamel paints hand brush. 

Flat black on the inner surface of the head lights to cover the some of the paints melt by glue

And some colors on the dash board

Static model : Tamiya 1/24 Porsche 956 #23

Painted and installed a few small pieces of optional part onto the engine.

After spray booth :

Test fit on the chassis :

Track visit with TA08R

Been running TA08R for a few morning

Improving setup (gear ratio) and overall handling

Static model : Tamiya 1/24 Porsche 956 #22

Record breaking - I have not touch this project for 10 years !

It is time to continue. 

This is what it looks like when I opened the box again :

Some minor paint damage on the bodyshell, which I will handprint later.

This round I have done the following :

1. polish the bodyshell where the paint chip, washed it again to remove any dust

2. masked the front bodyshell where the flat black should be applied on the cockpit already and head lights

3. masked the windshield and side windows with the given mask

4. applied enamel flat black for the above together with dashboard + steering wheel and front light inner support

5. fit 3 out of 5 seatbelt on driver seat

6. added PE nets inside cockpit

7. combined cockpit part with the engine wall part

More to go

Magic Factory 1/9 Honda CBR1000RR-R #2

Slow progress - after a few months, pick up the engine block and continue

Started with the suspension 

With the pipes

Unfortunately during the build, one of the small black color pipe was damaged. Will see how I can fit it back during the next few steps. 

Pocher 1/8 Utopia

The box is huge !

Italeri 1/12 kits

A pair of old cars in 1/12

New bodyshell for IF-14-2 Mid

Prepared an Xtreme Twister Speciale bodyshell for IF-14-2 Mid, it can also fit with Yokomo BD11/12.

Axon TC10/3 build #1

Started the build and wash the bearings first as usual.

Chassis came with the box is graphite and I have prepared a 1.5mm alloy chassis from WeiRC.

Target is to build a 17.5T blinky GT style TC - Tamiya 911 body. 

Last generation of T4 - 2021

Got a NIB - Xray T4 2021 - it was the3 last one before evolution comes.

I still have the first T4 which is ready to run, and now got its last generation before changing to X4.

I might build and run it, will have to look for the alloy chassis, as this box is graphite chassis version. 

AE RC28

 New year open box !

First TC run in 2026

Prepared for two cars - the usual IF-14-2 Mid and Mugen MTC2 which is brand new.

Weather is good, but the IF-14-2 Mid only last for 2 laps - the rear shock is broken.

Will have to open the shock and check. Possibly the screw which hold the piston is loosen inside. 

MTC2 debut run was good - it can be faster tho.