ARC A11 with Steel Chassis - WIP #6

Chassis build is completed, pending final setup

Fitted with the Avalon Vortex bodyshell

ARC A11 with Steel Chassis - WIP #5

Continue the basic setup for the ARC A11

Trying the up-stop first time ever. Measurement is done by the Infinity Droop Gauge without the two 10mm block underneath the chassis. Front 24.6mm and rear is 23.6mm as a starting point. 

ARC A11 with Steel Chassis - WIP #4

Wiring completed

ESC : Cayote Crest X 160amp

Motor : HW G3 4.5T

Gear ration : 1:7.19

Axon TC10/3 First setup 13.5 Blinky