IF15 setup change

 

Back to setup station, reduced front caster to 4 degree

Droop 0/4.2mm, camber -2/-3.5 degree, front toe out 1 and rear toe in 3 degree

Re condition the tyres too, ride height 5.8/7mm

Track time this week : Axon TC10/3

Ran Axon TC10/3 with blinky 13.5T motor. With a slight change of setup, it runs more stable and predictable, yield more consistent laptime.

Also spent 6 tanks with the IF15 after last touch about 4 months ago. Understand the chassis more. Post run, adjusted a few setting (reduce front caster ... etc) and get ready for next track day.

Bandai HG 1/35 Brutish Dog #1

Start a new simple project on a lazy weekend 

ARC A11 with Steel Chassis - WIP #6

Chassis build is completed, pending final setup

Fitted with the Avalon Vortex bodyshell

ARC A11 with Steel Chassis - WIP #5

Continue the basic setup for the ARC A11

Trying the up-stop first time ever. Measurement is done by the Infinity Droop Gauge without the two 10mm block underneath the chassis. Front 24.6mm and rear is 23.6mm as a starting point. 

ARC A11 with Steel Chassis - WIP #4

Wiring completed

ESC : Cayote Crest X 160amp

Motor : HW G3 4.5T

Gear ration : 1:7.19

Axon TC10/3 First setup 13.5 Blinky