I tested run FF03Pro today with the following setting :

Camber : F/R -1/-1.5

Shocks oil : 40wt all around

Ride height : F/R 5mm

Droop : F/R 6/6mm

Anti-roll bar : F/R yellow/red

All the rest are the same as default.

Running with HobbyWing 120a 518stock with SpeedPassion 13.5R gear ratio at 6.4, turbo/boost are both enabled.

Chassis has a lot of roll during corners, can apply a light brake before entering sharp turn. Overall handling is very smooth and a little bit of understeering.

The car has good top speed on long straight but a bit lack of acceleration in in-fields. This should be compensated by more timing punch or different gear ratio.

Happy first run today !