Egress Vintage Restoration #2

Collect a few parts from the 2013 re release Egress : 

Installed an old Orca VTC Pro Spec MK2 ESC with 11.5 motor in blinky mode, together with a Futaba S3003 and KO receiver. Fit in 1/10 GP form tires, with 23T pinion to make final gear ratio 1:7.89.

Next is the battery. I don't want to go back to stick pack, and I tried to fit in a few different sizes of 2s Lipo. End up, settle with 2s shorty pack, and use the original hole on upper deck to connect to the battery pole, without any modification to the chassis. Just need to double side tape a few stopper around the battery to avoid its movement during run. 

The chassis has a Avente 2001 undertray when I bought it, I will keep it and now fit a re-re Egress body on top. It does not match with the undertray, but should be fine as an on-road car. 

Next, have to wash the original paints on the wing before the new paint job.