Trumpeter 1/144 F-22A #2

Applied some black glue to fill the gap under wing. Sanded it down.

Mask the canopy and ready for first primer.

First primer done to check the surface.

More black glue and sanding on the under-wing, also tried to close the two out holes on each side under wing for the extension mount, as I will only use the inner mount for the fuel tank.

Installed the vertical stabilizers and also attempt the fill the gap with black glue.

Sharpen the major panel lines with a 0.125 chisel and recovered the details which have been sanded down.

It is small, however the details aren't too bad !